Read more
Anytone AT-D578UV-PRO
- Dohvati vezu
- X
- e-pošta
- Druge aplikacije
The transmit power can be set in four levels, max. power is 50 Watt on 2m VHFamd 45 W on 70cm UHF.
The further feature set of the D578UV is very extensive. Up to 4000 different channels can be stored (digital and analogue, mixed operation also possible); 10000 talk groups can be configured and the memory holds up to 200,000 digital contacts. Thus the complete worldwide DMR user database can be stored in the device. In analog mode, functions such as DTMF, CTCSS and DCS are supported as well as coding with two-tone and 5-tone signals. A tone burst of 1750 Hz is also available. A total of 10 buttons on the radio and microphone can be individually assigned functions, allowing users to set their own personal preferences. The brightness of the 1.77" colour display and the backlit keys on the unit and microphone can be adjusted in several stages. This guarantees ideal readability even in sunlight and glare-free operation while driving in the dark.
The roaming function of the AT-D578UV is independent of the position of the device. When roaming, the system checks whether a repeater is reachable from a predefined list and automatically sets it if necessary. The trigger for roaming can be a manual start, or the information that the set repeater is not (no longer) reachable. The roaming channels can be divided into zones, similar to the conventional channels, which correspond for example to geographical regions.
Another feature to highlight is the possibility of storing several DMR IDs. So it would be conceivable to use the device both in a professional company radio environment and later with a different ID in amateur radio. Or several family members share a device. The Anytone AT-D578UV is equipped with a GPS receiver, the position data can be transmitted by radio (DMR-APRS and FM-APRS). The device also has a connector for an external GPS antenna. The AT-D578UV is a TWINband device for 2m (VHF) and 70cm (UHF), on both bands you can work either analogue in FM or digital in DMR. A WFM receiver for the FM radio band is also available. The antenna connection is a PL socket. The programming cable (USB/Micro-USB) is included in the scope of delivery; the latest programming software and firmware is available free of charge at www.anytone.de or on the manufacturer's website.
Features of the Anytone AT-D578PRO
- 1.77 inch colour LC display
- Numbers keyboard on microphone, 10 freely configurable keys
- TWINband 2m/70cm (V/U, V/V, U/U)
- IF channel width selectable 12.5/25 kHz (analog) or fixed 12.5 kHz (DMR)
- Digital: DMR (Tier I/II) and analog FM
- WFM receiver 87.5 - 108 MHz
- Up to five DMR IDs programmable
- 4000 memories, 10000 Talk groups, 200000 digital contacts
- 250 Zones (memory banks) programmable
- Display of ID (Callsign), location and country of QSO partner
- Two timeslots available, all colour codes available
- Transmit power 5, 10, 25, 45 (UHF) / 50 (VHF) Watt
- Automatic mode selection Analog/Digital
- Tone burst 1750 Hz
- Tone squelch: CTCSS, DCS
- Tone signalling: DTMF, 2 tone, 5 tone
- GPS receiver
- New simultaneous reception analog/digital or analog/analog
- New Many APRS parameters settable on radio, without computer
- Recording and playback of received signal (DMR only)
- New Roaming (selection of reachable repeater from a pre-programmed list)
- VOX function
- New Bluetooth interface
- Individual volume controls per VFO
- Dohvati vezu
- X
- e-pošta
- Druge aplikacije
Primjedbe
Objavi komentar